How to connect and pair

Connect using Bluetooth

  1. Turn the source knob to Bluetooth®.

  2. Push and hold the source knob for 3 seconds..

  3. The Bluetooth indicator starts to blink

  4. Enable Bluetooth on your audio device (smartphone, tablet or computer).

  5. On your device, select Stanmore Multi-room from the Bluetooth list and accept pairing.

  6. The Bluetooth indicator on the speaker turns to steady lit and the units are connected.

The Stanmore Multi-Room stores up to 8 (Eight) Bluetooth® devices and tries to connect to the last connected device first.

For example, if the Speaker has been connected to the devices: A-B-C-D-E-F-G-H, device H is given first priority, while device A is given last priority. Every time that the Bluetooth® is selected, the Speaker will do an auto connection of devices within its range.

Note: If the Bluetooth device is moved too far from the Stanmore Multi-Room, the connection drops. Move the device within approximately 10 metres without obstacles to the speaker and the connection is automatically restored.

Connect via AUX Input (3.5 mm Stereo Input)

  1. Connect 3.5 mm Stereo Plug to the input labelled AUX on the speaker.

  2. Connect the other end of the cord to the audio output on your music player.

  3. Turn the source knob to AUX and push once.

Note: Audio cables are not included in the Stanmore Multi-Room.

Connect via RCA Input (RCA Ports)

  1. Connect a cord with RCA Plugs to the RCA Inputs (Left and Right) on the back of the Speaker.

  2. Connect the other end of the cord to the output on your sound source.

  3. Turn the source knob to RCA and push once.

Note: Turntable must have a built in RIAA Pre Amplifier, otherwise a separate Pre Amplifier is needed.

Search Support